豆瓣评分
内容简介 · · · · · ·
本书是国内第一本关于SpaceClaim软件的专业学习用书，是作者基于软件帮助文件，结合自身项目经验，梳理编辑出的一套简洁明了、方便易学的软件入门工具书，图文并茂地讲解了SpaceClaim软件的各类操作及应用案例。
本书作为市面上仅有的SpaceClaim软件书籍，以介绍直接建模功能和分享CAE前处理全新解决方式为背景，共分为5章：
第1章介绍ANSYS 产品体系和ANSYS Workbench平台；
第2章详细介绍SpaceClaim软件的交互界面、个性化选项及提高效率的快捷方式；
第3章阐述在从无到有的建模过程中涉及工具的功能及相关操作步骤，包括设计、详细、测量等选项卡的内容；
第4章分为两方面内容：
a) 一方面是在从有到改的修复模型过程中，梳理对边、面、体等常见几何模型的检查及处理方法；
b) 另一方面分类讲解在CAE前处理过程中的常见情况...
本书是国内第一本关于SpaceClaim软件的专业学习用书，是作者基于软件帮助文件，结合自身项目经验，梳理编辑出的一套简洁明了、方便易学的软件入门工具书，图文并茂地讲解了SpaceClaim软件的各类操作及应用案例。
本书作为市面上仅有的SpaceClaim软件书籍，以介绍直接建模功能和分享CAE前处理全新解决方式为背景，共分为5章：
第1章介绍ANSYS 产品体系和ANSYS Workbench平台；
第2章详细介绍SpaceClaim软件的交互界面、个性化选项及提高效率的快捷方式；
第3章阐述在从无到有的建模过程中涉及工具的功能及相关操作步骤，包括设计、详细、测量等选项卡的内容；
第4章分为两方面内容：
a) 一方面是在从有到改的修复模型过程中，梳理对边、面、体等常见几何模型的检查及处理方法；
b) 另一方面分类讲解在CAE前处理过程中的常见情况；
第5章以实例的形式介绍通用CAE前处理的操作步骤，通过七个实例逐一展示。
作者简介 · · · · · ·
本书作者之一是安世亚太高级结构工程师王伟达，从事CAE技术及咨询工作近十年，参与过多个结构仿真项目实战，拥有多种工业品CAE前处理工作经验。
本书另外一位主要作者是安世亚太结构专家黄志新博士，从事工程力学及仿真计算工作十余年，曾撰写多部ANSYS软件学习手册，并参与编著多个行业应用案例和项目书。
目录 · · · · · ·
第1 章 ANSYS 软件概述······························ 1
1.1 ANSYS 软件简介······························· 1
1.2 ANSYS Workbench 平台及模块·············· 3
1.2.1 Workbench 平台界面······················ 4
1.2.2 菜单栏······································· 4
1.2.2.1 文件菜单······························ 4
· · · · · · (更多)
1.1 ANSYS 软件简介······························· 1
1.2 ANSYS Workbench 平台及模块·············· 3
1.2.1 Workbench 平台界面······················ 4
1.2.2 菜单栏······································· 4
1.2.2.1 文件菜单······························ 4
· · · · · · (更多)
第1 章 ANSYS 软件概述······························ 1
1.1 ANSYS 软件简介······························· 1
1.2 ANSYS Workbench 平台及模块·············· 3
1.2.1 Workbench 平台界面······················ 4
1.2.2 菜单栏······································· 4
1.2.2.1 文件菜单······························ 4
1.2.2.2 视图菜单······························ 6
1.2.2.3 工具菜单······························ 7
1.2.2.4 单位菜单······························ 8
1.2.2.5 扩展包菜单··························· 8
1.2.2.6 帮助菜单······························ 8
1.2.3 工具箱······································· 8
1.2.4 项目管理页面······························ 9
1.2.4.1 系统和单元格······················· 10
1.2.4.2 页面连接····························· 14
1.2.4.3 弹出菜单····························· 15
1.3 ANSYS SpaceClaim 功能特点··············· 17
1.3.1 直接建模··································· 18
1.3.2 二维用户到三维建模的最佳选择····· 18
1.3.3 丰富的数据接口·························· 19
1.3.4 三维几何模型建立功能················· 20
1.3.5 适合于CAE 仿真的CAD 模型修改·· 22
1.3.6 逆向工程的极佳选择···················· 24
1.3.7 辅助制造的利器·························· 25
第2 章 ANSYS SpaceClaim 使用简介············· 26
2.1 引言··············································· 26
2.2 交互界面········································· 27
2.3 SpaceClaim 选项设置·························· 32
2.3.1 常用········································· 32
2.3.2 细节设计··································· 32
2.3.3 外观········································· 33
2.3.4 选择········································· 34
2.3.5 靠齐········································· 34
2.3.6 单位········································· 35
2.3.7 钣金········································· 36
2.3.8 浏览········································· 37
2.3.9 高级········································· 38
2.3.10 导入/导出································ 39
2.4 面板操作········································ 41
2.4.1 结构········································· 41
2.4.2 图层········································· 43
2.4.3 选择········································· 45
2.4.4 组············································ 47
2.4.5 视图········································· 48
2.4.6 选项········································· 49
2.4.7 属性········································· 51
2.5 快捷方式········································ 51
2.5.1 鼠标手势··································· 51
2.5.2 快捷键······································ 53
2.5.3 组合快捷键································ 54
2.5.4 自定义快捷键····························· 55
第3 章 当建模变得“直接”—ANSYS
SpaceClaim 建模指南························ 56
3.1 引言·············································· 56
3.2 视图模式········································ 57
3.3 建模·············································· 57
3.3.1 选择········································· 58
3.3.2 草图········································· 60
3.3.2.1 草图模式···························· 62
3.3.2.2 草绘创建工具······················ 64
3.3.2.3 草绘编辑工具······················ 67
3.3.2.4 布局·································· 70
3.3.3 拉动········································· 71
3.3.3.1 向导··································· 71
3.3.3.2 选项··································· 72
3.3.3.3 拉伸面································ 73
3.3.3.4 转动面································ 73
3.3.3.5 转动边································ 74
3.3.3.6 拔模表面····························· 75
3.3.3.7 扫掠面································ 75
3.3.3.8 螺旋面································ 77
3.3.3.9 圆角··································· 78
3.3.3.10 全圆角······························ 78
3.3.3.11 变半径圆角························ 79
3.3.3.12 倒角································· 80
3.3.3.13 延伸边······························ 80
3.3.3.14 突出边······························ 81
3.3.3.15 复制边······························ 82
3.3.3.16 旋转边······························ 82
3.3.3.17 缩放体······························ 83
3.3.4 移动········································· 83
3.3.4.1 向导··································· 84
3.3.4.2 选项··································· 85
3.3.4.3 移动对象····························· 86
3.3.4.4 旋转实体····························· 86
3.3.4.5 分解装配体·························· 87
3.3.5 融合········································· 87
3.3.5.1 向导··································· 87
3.3.5.2 选项··································· 88
3.3.5.3 面之间进行过渡···················· 89
3.3.5.4 边之间进行过渡···················· 89
3.3.5.5 点之间进行过渡···················· 89
3.3.6 调整面······································ 90
3.3.6.1 工具··································· 91
3.3.6.2 曲面造型····························· 91
3.3.7 参数化······································ 92
3.3.7.1 尺寸参数化·························· 92
3.3.7.2 位置参数化·························· 92
3.3.7.3 参数间函数·························· 93
3.3.7.4 表达式································ 93
3.4 相交··············································· 94
3.4.1 组合········································· 95
3.4.1.1 向导·································· 95
3.4.1.2 选项·································· 96
3.4.1.3 合并实体···························· 96
3.4.1.4 合并面······························· 97
3.4.1.5 合并封闭面························· 97
3.4.1.6 合并面和平面······················ 97
3.4.1.7 面切割实体························· 98
3.4.1.8 实体切割实体······················ 98
3.4.1.9 实体或平面分割曲面············· 98
3.4.1.10 曲面分割曲面····················· 99
3.4.1.11 实体中删除封闭的体············ 99
3.4.2 拆分体······································ 99
3.4.2.1 向导·································· 99
3.4.2.2 选项·································· 99
3.4.2.3 表面拆分实体····················· 100
3.4.3 拆分面边··································101
3.4.3.1 向导·································101
3.4.3.2 选项·································101
3.4.3.3 UV 拆分面························· 101
3.4.3.4 一点拆分面························ 102
3.4.3.5 两点拆分面························ 102
3.4.4 投影········································102
3.4.4.1 向导·································103
3.4.4.2 选项·································103
3.4.4.3 边到实体··························· 103
3.4.4.4 注释文本··························· 103
3.4.4.5 线投影到实体表面···············104
3.5 创建·············································104
3.5.1 平面········································105
3.5.1.1 向导·································106
3.5.1.2 构建平面··························· 106
3.5.1.3 钉住平面··························· 107
3.5.1.4 修改平面属性····················· 108
3.5.2 轴···········································108
3.5.3 空间点·····································109
3.5.4 局部坐标系······························· 109
3.5.4.1 形心局部坐标系·················· 110
3.5.4.2 临时点局部坐标系··············· 110
3.5.5 阵列········································111
3.5.5.1 向导··································112
3.5.5.2 线性阵列····························112
3.5.5.3 圆形阵列····························113
3.5.5.4 填充阵列····························114
3.5.5.5 编辑阵列····························115
3.5.6 壳体········································115
3.5.6.1 向导··································116
3.5.6.2 创建壳体····························116
3.5.6.3 编辑壳体····························117
3.5.7 偏移········································117
3.5.7.1 向导··································117
3.5.7.2 选项··································117
3.5.7.3 创建偏移关系······················118
3.5.7.4 取消偏移关系······················118
3.5.8 镜像········································118
3.5.8.1 向导··································119
3.5.8.2 选项··································119
3.5.8.3 镜像对象··························· 120
3.5.8.4 创建镜像关系····················· 120
3.5.8.5 删除镜像关系····················· 120
3.6 装配············································· 120
3.6.1 组件······································· 122
3.6.2 对齐组件································· 123
3.6.3 定向组件································· 123
3.7 工程图纸······································· 124
3.7.1 注释······································· 124
3.7.1.1 创建································· 125
3.7.1.2 编辑································· 126
3.7.1.3 可见性······························ 127
3.7.1.4 格式································· 127
3.7.1.5 指引线······························ 127
3.7.1.6 尺寸注释··························· 128
3.7.2 符号······································· 129
3.7.2.1 基准符号··························· 129
3.7.2.2 表面粗糙度符号·················· 129
3.7.2.3 中心线······························ 130
3.7.2.4 螺纹································· 130
3.8 测量············································· 131
3.8.1 检查········································131
3.8.1.1 实体属性··························· 132
3.8.1.2 截面属性··························· 133
3.8.1.3 计算投影面积····················· 133
3.8.2 干涉········································133
3.8.2.1 相交边······························ 133
3.8.2.2 相交体积··························· 134
3.8.3 质量········································134
3.8.3.1 法线·································135
第4 章 当SpaceClaim 遇上ANSYS—CAE
前处理应用···································136
4.1 引言·············································136
4.2 几何接口·······································137
4.2.1 导入········································137
4.2.2 导出········································139
4.3 几何前处理····································140
4.3.1 检查········································141
4.3.1.1 检查·································141
4.3.1.2 剖面·································142
4.3.2 点···········································147
4.3.2.1 工作点······························ 147
4.3.2.2 点焊·································148
4.3.3 边···········································150
4.3.3.1 分割边······························ 150
4.3.3.2 额外边······························ 151
4.3.3.3 拟合曲线··························· 152
4.3.4 面···········································152
4.3.4.1 拼接/分离·························· 153
4.3.4.2 填补·································154
4.3.4.3 合并/拆分·························· 157
4.3.4.4 压印·································159
4.3.4.5 重复·································160
4.3.4.6 替换·································161
4.3.5 体···········································162
4.3.5.1 孔····································162
4.3.5.2 圆角·································162
4.3.5.3 干涉·································164
4.3.5.4 三角面片··························· 165
4.3.6 梁···········································166
4.3.6.1 线或边转梁························ 167
4.3.6.2 实体抽梁··························· 169
4.3.6.3 变更横截面························ 170
4.3.6.4 查看截面属性····················· 170
4.3.6.5 编辑截面轮廓····················· 171
4.3.6.6 调整方向··························· 171
4.3.6.7 自动延伸梁························ 173
4.3.6.8 手动延伸梁························ 174
4.3.6.9 延伸后修正························ 175
4.3.6.10 自定义截面······················ 175
4.3.7 壳·········································· 178
4.3.7.1 面转为壳··························· 178
4.3.7.2 实体手动抽壳····················· 179
4.3.7.3 实体自动抽壳····················· 180
4.3.7.4 延伸面/焊缝······················· 180
4.3.7.5 法向调整··························· 181
4.3.8 场·········································· 183
4.3.8.1 外场································· 183
4.3.8.2 内场································· 185
4.3.8.3 过渡接头··························· 186
4.3.9 子模型···································· 188
4.4 共享拓扑······································· 189
4.4.1 设置······································· 190
4.4.2 检查······································· 191
4.5 其他前处理···································· 194
4.5.1 参数互动································· 196
4.5.1.1 尺寸参数化························ 196
4.5.1.2 位置参数化························ 197
4.5.2 集合互动································· 197
4.5.3 材料互动································· 198
4.5.4 坐标互动································· 200
4.5.5 场互动·····································202
4.5.6 二维分析··································203
第5 章 模型处理实例解析·························· 206
实例一 基于2D 图纸创建3D 模型············206
1．拉动创建垫片································ 207
2．旋转生成销轴································ 210
3．拉动创建底座 ································212
4．创建其他零件································ 215
5．组装············································216
实例二 几何模型前处理························· 217
1．填充凸台······································218
2．批量删除圆角································ 218
3．批量删除圆孔································ 221
4．删除相贯圆角································ 222
5．小结············································223
实例三 结构分析的抽梁壳······················ 224
1．抽梁············································225
2．抽壳············································226
3．共享拓扑······································229
4．小结············································230
实例四 流体分析的抽场························· 231
1．创建内流场···································231
2．创建外流场···································232
3．更新外流场···································235
实例五 三角面片文件重建······················ 237
1．抽取草图······································237
2．旋转拉伸截面重建实体···················· 241
3．偏差分析······································242
4．小结············································244
实例六 工程图纸—尺寸注释················244
实例七 曲面造型—花瓶······················ 249
· · · · · · (收起)
1.1 ANSYS 软件简介······························· 1
1.2 ANSYS Workbench 平台及模块·············· 3
1.2.1 Workbench 平台界面······················ 4
1.2.2 菜单栏······································· 4
1.2.2.1 文件菜单······························ 4
1.2.2.2 视图菜单······························ 6
1.2.2.3 工具菜单······························ 7
1.2.2.4 单位菜单······························ 8
1.2.2.5 扩展包菜单··························· 8
1.2.2.6 帮助菜单······························ 8
1.2.3 工具箱······································· 8
1.2.4 项目管理页面······························ 9
1.2.4.1 系统和单元格······················· 10
1.2.4.2 页面连接····························· 14
1.2.4.3 弹出菜单····························· 15
1.3 ANSYS SpaceClaim 功能特点··············· 17
1.3.1 直接建模··································· 18
1.3.2 二维用户到三维建模的最佳选择····· 18
1.3.3 丰富的数据接口·························· 19
1.3.4 三维几何模型建立功能················· 20
1.3.5 适合于CAE 仿真的CAD 模型修改·· 22
1.3.6 逆向工程的极佳选择···················· 24
1.3.7 辅助制造的利器·························· 25
第2 章 ANSYS SpaceClaim 使用简介············· 26
2.1 引言··············································· 26
2.2 交互界面········································· 27
2.3 SpaceClaim 选项设置·························· 32
2.3.1 常用········································· 32
2.3.2 细节设计··································· 32
2.3.3 外观········································· 33
2.3.4 选择········································· 34
2.3.5 靠齐········································· 34
2.3.6 单位········································· 35
2.3.7 钣金········································· 36
2.3.8 浏览········································· 37
2.3.9 高级········································· 38
2.3.10 导入/导出································ 39
2.4 面板操作········································ 41
2.4.1 结构········································· 41
2.4.2 图层········································· 43
2.4.3 选择········································· 45
2.4.4 组············································ 47
2.4.5 视图········································· 48
2.4.6 选项········································· 49
2.4.7 属性········································· 51
2.5 快捷方式········································ 51
2.5.1 鼠标手势··································· 51
2.5.2 快捷键······································ 53
2.5.3 组合快捷键································ 54
2.5.4 自定义快捷键····························· 55
第3 章 当建模变得“直接”—ANSYS
SpaceClaim 建模指南························ 56
3.1 引言·············································· 56
3.2 视图模式········································ 57
3.3 建模·············································· 57
3.3.1 选择········································· 58
3.3.2 草图········································· 60
3.3.2.1 草图模式···························· 62
3.3.2.2 草绘创建工具······················ 64
3.3.2.3 草绘编辑工具······················ 67
3.3.2.4 布局·································· 70
3.3.3 拉动········································· 71
3.3.3.1 向导··································· 71
3.3.3.2 选项··································· 72
3.3.3.3 拉伸面································ 73
3.3.3.4 转动面································ 73
3.3.3.5 转动边································ 74
3.3.3.6 拔模表面····························· 75
3.3.3.7 扫掠面································ 75
3.3.3.8 螺旋面································ 77
3.3.3.9 圆角··································· 78
3.3.3.10 全圆角······························ 78
3.3.3.11 变半径圆角························ 79
3.3.3.12 倒角································· 80
3.3.3.13 延伸边······························ 80
3.3.3.14 突出边······························ 81
3.3.3.15 复制边······························ 82
3.3.3.16 旋转边······························ 82
3.3.3.17 缩放体······························ 83
3.3.4 移动········································· 83
3.3.4.1 向导··································· 84
3.3.4.2 选项··································· 85
3.3.4.3 移动对象····························· 86
3.3.4.4 旋转实体····························· 86
3.3.4.5 分解装配体·························· 87
3.3.5 融合········································· 87
3.3.5.1 向导··································· 87
3.3.5.2 选项··································· 88
3.3.5.3 面之间进行过渡···················· 89
3.3.5.4 边之间进行过渡···················· 89
3.3.5.5 点之间进行过渡···················· 89
3.3.6 调整面······································ 90
3.3.6.1 工具··································· 91
3.3.6.2 曲面造型····························· 91
3.3.7 参数化······································ 92
3.3.7.1 尺寸参数化·························· 92
3.3.7.2 位置参数化·························· 92
3.3.7.3 参数间函数·························· 93
3.3.7.4 表达式································ 93
3.4 相交··············································· 94
3.4.1 组合········································· 95
3.4.1.1 向导·································· 95
3.4.1.2 选项·································· 96
3.4.1.3 合并实体···························· 96
3.4.1.4 合并面······························· 97
3.4.1.5 合并封闭面························· 97
3.4.1.6 合并面和平面······················ 97
3.4.1.7 面切割实体························· 98
3.4.1.8 实体切割实体······················ 98
3.4.1.9 实体或平面分割曲面············· 98
3.4.1.10 曲面分割曲面····················· 99
3.4.1.11 实体中删除封闭的体············ 99
3.4.2 拆分体······································ 99
3.4.2.1 向导·································· 99
3.4.2.2 选项·································· 99
3.4.2.3 表面拆分实体····················· 100
3.4.3 拆分面边··································101
3.4.3.1 向导·································101
3.4.3.2 选项·································101
3.4.3.3 UV 拆分面························· 101
3.4.3.4 一点拆分面························ 102
3.4.3.5 两点拆分面························ 102
3.4.4 投影········································102
3.4.4.1 向导·································103
3.4.4.2 选项·································103
3.4.4.3 边到实体··························· 103
3.4.4.4 注释文本··························· 103
3.4.4.5 线投影到实体表面···············104
3.5 创建·············································104
3.5.1 平面········································105
3.5.1.1 向导·································106
3.5.1.2 构建平面··························· 106
3.5.1.3 钉住平面··························· 107
3.5.1.4 修改平面属性····················· 108
3.5.2 轴···········································108
3.5.3 空间点·····································109
3.5.4 局部坐标系······························· 109
3.5.4.1 形心局部坐标系·················· 110
3.5.4.2 临时点局部坐标系··············· 110
3.5.5 阵列········································111
3.5.5.1 向导··································112
3.5.5.2 线性阵列····························112
3.5.5.3 圆形阵列····························113
3.5.5.4 填充阵列····························114
3.5.5.5 编辑阵列····························115
3.5.6 壳体········································115
3.5.6.1 向导··································116
3.5.6.2 创建壳体····························116
3.5.6.3 编辑壳体····························117
3.5.7 偏移········································117
3.5.7.1 向导··································117
3.5.7.2 选项··································117
3.5.7.3 创建偏移关系······················118
3.5.7.4 取消偏移关系······················118
3.5.8 镜像········································118
3.5.8.1 向导··································119
3.5.8.2 选项··································119
3.5.8.3 镜像对象··························· 120
3.5.8.4 创建镜像关系····················· 120
3.5.8.5 删除镜像关系····················· 120
3.6 装配············································· 120
3.6.1 组件······································· 122
3.6.2 对齐组件································· 123
3.6.3 定向组件································· 123
3.7 工程图纸······································· 124
3.7.1 注释······································· 124
3.7.1.1 创建································· 125
3.7.1.2 编辑································· 126
3.7.1.3 可见性······························ 127
3.7.1.4 格式································· 127
3.7.1.5 指引线······························ 127
3.7.1.6 尺寸注释··························· 128
3.7.2 符号······································· 129
3.7.2.1 基准符号··························· 129
3.7.2.2 表面粗糙度符号·················· 129
3.7.2.3 中心线······························ 130
3.7.2.4 螺纹································· 130
3.8 测量············································· 131
3.8.1 检查········································131
3.8.1.1 实体属性··························· 132
3.8.1.2 截面属性··························· 133
3.8.1.3 计算投影面积····················· 133
3.8.2 干涉········································133
3.8.2.1 相交边······························ 133
3.8.2.2 相交体积··························· 134
3.8.3 质量········································134
3.8.3.1 法线·································135
第4 章 当SpaceClaim 遇上ANSYS—CAE
前处理应用···································136
4.1 引言·············································136
4.2 几何接口·······································137
4.2.1 导入········································137
4.2.2 导出········································139
4.3 几何前处理····································140
4.3.1 检查········································141
4.3.1.1 检查·································141
4.3.1.2 剖面·································142
4.3.2 点···········································147
4.3.2.1 工作点······························ 147
4.3.2.2 点焊·································148
4.3.3 边···········································150
4.3.3.1 分割边······························ 150
4.3.3.2 额外边······························ 151
4.3.3.3 拟合曲线··························· 152
4.3.4 面···········································152
4.3.4.1 拼接/分离·························· 153
4.3.4.2 填补·································154
4.3.4.3 合并/拆分·························· 157
4.3.4.4 压印·································159
4.3.4.5 重复·································160
4.3.4.6 替换·································161
4.3.5 体···········································162
4.3.5.1 孔····································162
4.3.5.2 圆角·································162
4.3.5.3 干涉·································164
4.3.5.4 三角面片··························· 165
4.3.6 梁···········································166
4.3.6.1 线或边转梁························ 167
4.3.6.2 实体抽梁··························· 169
4.3.6.3 变更横截面························ 170
4.3.6.4 查看截面属性····················· 170
4.3.6.5 编辑截面轮廓····················· 171
4.3.6.6 调整方向··························· 171
4.3.6.7 自动延伸梁························ 173
4.3.6.8 手动延伸梁························ 174
4.3.6.9 延伸后修正························ 175
4.3.6.10 自定义截面······················ 175
4.3.7 壳·········································· 178
4.3.7.1 面转为壳··························· 178
4.3.7.2 实体手动抽壳····················· 179
4.3.7.3 实体自动抽壳····················· 180
4.3.7.4 延伸面/焊缝······················· 180
4.3.7.5 法向调整··························· 181
4.3.8 场·········································· 183
4.3.8.1 外场································· 183
4.3.8.2 内场································· 185
4.3.8.3 过渡接头··························· 186
4.3.9 子模型···································· 188
4.4 共享拓扑······································· 189
4.4.1 设置······································· 190
4.4.2 检查······································· 191
4.5 其他前处理···································· 194
4.5.1 参数互动································· 196
4.5.1.1 尺寸参数化························ 196
4.5.1.2 位置参数化························ 197
4.5.2 集合互动································· 197
4.5.3 材料互动································· 198
4.5.4 坐标互动································· 200
4.5.5 场互动·····································202
4.5.6 二维分析··································203
第5 章 模型处理实例解析·························· 206
实例一 基于2D 图纸创建3D 模型············206
1．拉动创建垫片································ 207
2．旋转生成销轴································ 210
3．拉动创建底座 ································212
4．创建其他零件································ 215
5．组装············································216
实例二 几何模型前处理························· 217
1．填充凸台······································218
2．批量删除圆角································ 218
3．批量删除圆孔································ 221
4．删除相贯圆角································ 222
5．小结············································223
实例三 结构分析的抽梁壳······················ 224
1．抽梁············································225
2．抽壳············································226
3．共享拓扑······································229
4．小结············································230
实例四 流体分析的抽场························· 231
1．创建内流场···································231
2．创建外流场···································232
3．更新外流场···································235
实例五 三角面片文件重建······················ 237
1．抽取草图······································237
2．旋转拉伸截面重建实体···················· 241
3．偏差分析······································242
4．小结············································244
实例六 工程图纸—尺寸注释················244
实例七 曲面造型—花瓶······················ 249
· · · · · · (收起)
丛书信息
· · · · · ·
万水ANSYS技术丛书(共13册)，
这套丛书还有
《ANSYS 9.0经典产品高级分析技术与实例详解》《ANSYS Workbench结构工程高级应用》《ANSYS APDL参数化有限元分析技术及其应用实例》《ANSYS 9.0经典产品基础教程与实例详解》《ANSYS Icepak进阶应用导航案例》
等
。
ANSYS SpaceClaim 直接建模指南与CAE前处理应用解析的书评 · · · · · · ( 全部 0 条 )
论坛 · · · · · ·
在这本书的论坛里发言谁读这本书? · · · · · ·
二手市场
· · · · · ·
- 在豆瓣转让 有4人想读，手里有一本闲着?
订阅关于ANSYS SpaceClaim 直接建模指南与CAE前处理应用解析的评论:
feed: rss 2.0
0 有用 MayCrew 2026-03-25 11:06:12 北京
使用说明？我觉得连官方的mannual都比这写得好一些，众所周知，ansys的mannual已经被喷到体无完肤了，不建议买。相比之下，蔡宜时 编制的直接建模与仿真指南要好很多。
0 有用 山海 2019-03-25 09:21:24
基础操作介绍得很详细，对初学者帮助很大。
0 有用 达芬奇迹nice 2018-01-16 20:07:00
既有详细的功能，又有很多的工程经验分享！对前处理的类型分的较细，提到了很多注意事项。
0 有用 Rocket.张 2019-07-29 23:10:25
spaceclaim的教材比较少，这本书讲的内容都比较基本，功能解释比较多。 现在3d打印比较火热，希望能出一些基于spaceclaim，拓扑优化后模型，逆向建模的教程。